The dual color controller is a mini size constant voltage RF receiver with 2 channel output, which can be
compatible with a variety of remotes to switch and dim dual color LEDs. The remote LED controller can
adjust color temperature for warm white and cold white LEDs. Multiple zones can be controlled separately
or synchronously with endless receivers in each zone. Smooth dimming from 0.1% to 100% without any
flickering can be very comfortable for human‘s eyes.

Feature

● Mini-style RF controller with 2 channel constant voltage output.
● Dual color(WW/CW) controller, need match dual color RF remote.
● Smooth dimming and switch without any flickering.
● Full compatibility with a variety of color temperature RF remote.
● Adopt 2.4GHz wireless technology, remote distance up to 30m.
● One receiver can accept up to 10 remote control.
● Auto-transmitting function, one receiver can transmit the signal from the remote to another receiver
within 15m, so the remote control distance can be beyond 100m.
● Can be WiFi controlled by APP installed on IOS or Android mobile devices while working with WiFi-Relay controller.
● Work with power repeater to expand output unlimitedly.

Technical parameter

● Input voltage: 12-24VDC
● Output power: 12V, Max 120W 24V, Max 240W
● Output current: 2CH, 5A/CH
● Size: L97×W33×H18mm

Dimension

Match guide

V2 receiver match with all kinds of single or multiple zone 2.4G RF remote controller.

● Use Match key

1. Match: Short press match key, within 5s, press on/off key or zone key of the remote.
2. Delete: Long press match key for 5s, delete all matched remote.
3. Multiple zone remote only use zone key to match each zone receiver.

● Use Power-up

1. Match: Switch off the power, then switch on power again,
short press on/off key or zone key 3 times on the remote quickly within 5s after power on,
the link is done once the light blinks 3 times.
2. Delete: Switch off the power, then switch on power again,
short press on/off key or zone key 5 times on the remote quickly within 5s after power on,
the unlink is done once the light blinks 5 times.
3. Multiple zone remote only use zone key to match each zone receiver.



 

Wiring diagram

Malfunctions analysis & troubleshooting

Safety information

1. The product shall be installed and serviced by a qualified person.
2. This product is non-waterproof. Please avoid the sun and rain.
3. Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation.
4. Please check if the output voltage of any power supplies used comply with the working voltage of the product.
5. Ensure all wire connections and polarities are correct and secure before applying power to avoid any damages to the LED lights. 
6. If a fault occurs please return the product to your supplier. Do not attempt tofix this product by yourself.